What a 200 amp panel upgrade costs in Arizona

The published ranges

Angi's Phoenix guide, updated July 2026, puts a straightforward upgrade to 200 amp service at $1,300 to $2,000 in this metro. National guides like Inch Calculator land in a similar $1,300 to $3,000 band for a basic swap. Local Phoenix electricians publish higher figures, commonly $5,000 to $8,000 and beyond, for full service upgrades.

Both are telling the truth. They are describing different jobs.

Why the same phrase covers a 5x price spread

A panel swap replaces the breaker box on the wall: new panel, breakers moved over, same service conductors, same meter. If your existing service entrance is healthy and already rated for 200 amps, that is the $1,300 to $2,000 job.

A full service upgrade replaces the whole chain: meter base, service entrance conductors, grounding system, and panel, coordinated with SRP or APS for disconnect and reconnect. Houses moving from genuine 100 amp service usually need this, and it is where the $5,000 and up numbers come from. Permit and inspection fees add roughly $250 to $650 depending on the city.

The rebate that changes the math

As of mid 2026, Arizona's HEAR program covers up to $4,000 of a panel upgrade for income qualified households. For a family that qualifies, that can turn a full service upgrade into a basic-swap price. Eligibility is income based and funding is not unlimited; the current rules and sources are in our rebate guide.

What quietly inflates quotes

A few honest cost adders to know before comparing bids: relocating the panel to a new wall, aluminum service conductors that need replacing, corrected grounding and bonding for older homes, stucco and drywall repair around a new meter location, and city specific requirements like exterior disconnect switches. A good quote names these line by line. A vague one discovers them mid job.

When 200 amps is the wrong answer

Not every house needs the upgrade. If the load calculation says your existing service holds your plans, we will tell you that, because a load management device for an EV charger costs a fraction of a service upgrade. Run the panel check for a first read, then get the real calculation done before you spend anything.